您好!欢迎来访东营博诚长臂挖掘机出租公司!关于我们 | 联系我们 | 在线留言
全国统一服务热线
18766733030
联系我们
联系人:王经理
联系电话:18766733030
地址:山东省东营市
新闻中心

浅谈长臂挖掘机的挖斗该怎么样加固!

日期:2018-11-30   来源:
现在很多单位都少不了长臂挖掘机,而对于长臂挖掘机的挖斗加固所需要注意的地方,小编就来为大家介绍一下。
Now many units are indispensable to the long arm excavator, and for the long arm excavator bucket reinforcement needs to pay attention to the place, Xiaobian will introduce to you.
1.齿根处的加强保护
1. Enhanced protection at the root of teeth
长臂挖掘机齿根安装板的加强非常有必要,如果在此处的加强不好,会导致磨损将剧烈,牙齿怎么也装不上去了。对于此处的加固可以采取两种方案,一种是贴加强筋,一种是包耐磨块。需要注意的是,贴加强筋的做法简便,经济,但是焊接时要注意不能与齿根的焊缝产生叠焊,这样会影响齿根焊接强度。
It is necessary to strengthen the mounting plate of the root of the Longarm excavator. If the reinforcement is not good here, it will lead to severe wear and tear, and the teeth can not be mounted. There are two schemes for the reinforcement here. One is to stick reinforcement bars, the other is to wrap wear-resistant blocks. It should be noted that the method of bonding reinforcing bars is simple and economical, but when welding, attention should be paid to not overlap with the weld of the root of the tooth, which will affect the welding strength of the root of the tooth.
2.边板及侧边加强
2. Side plate and side reinforcement
边板的剧烈磨损会使挖斗的有效斗容减小,影响生产力。同时,边刀也起到利于切入物料,保护边板的效果,所以挖斗需安装边刀。长臂挖掘机由于侧边并不是高磨损区,故侧边的加强不用太坚固,以免影响挖斗的整体重量。
The severe wear of the side plate will reduce the effective bucket capacity of the bucket and affect the productivity. At the same time, the edge knife also helps to cut into the material and protect the edge plate, so the excavator needs to install the edge knife. Since the side of the long arm excavator is not a high wear area, the strengthening of the side should not be too strong, so as not to affect the overall weight of the bucket.
3.底板加强
3. floor reinforcement
底板加强是非常有必要的。底板的加强筋要选择坚硬、耐磨的长型板材做原料,要保护挖斗的整体形状,以免影响切入角度,影响产能。加强筋的焊接要顺着原机筋板焊接的方向,在两块板上叠焊。
It is necessary to strengthen the floor. The reinforcing bars of the bottom plate should be made of hard and wear-resistant long plates, and the overall shape of the bucket should be protected so as to avoid affecting the angle of entry and productivity. The welding of reinforcing bars should follow the welding direction of the original machine rib plate and overlap the two plates.
4.挖斗内面的加强
4. Enhancement of the inside of the bucket
长臂挖掘机厂家的小编建议内面加强使用硬面堆焊,虽然价钱高,耗时长。但是它的耐磨性跟实效性是最强的,或者也可以选择贴部分加强筋,不宜过多。
The small edition of the long arm excavator manufacturer suggests that hard surfacing should be strengthened on the inside, although the price is high and the time consuming is long. However, its wear resistance and effectiveness are the strongest, or you can choose to paste part of the reinforcing ribs, not too much.
以上信息是由我们加长臂挖掘机以多年的从业经验整理发布的希望对大家以后的生活有所帮助,我们的网站是:
The above information is organized and published by our long arm excavator with many years of experience. We hope it will be helpful to everyone's future life. Our website is .

【本站图片均由网站所有方提供,部分图片来源于网络,如无意中侵犯了某媒体或个人的知识产权,请来信或来电告之,本网站将立即删除。】